Electrical diagram
Replacing lamps
1. Fold the front side of the inner wing (see chapter Body).
2. Remove the mounting bolt from the fog light.
3. Disconnect the 3-pin connector and remove the fog lamp.
4. Release the spring holder and remove the lamp.
Adjusting the aim of the fog lights
Before adjusting, make sure of the following.
The testing area must be horizontal.
The tire pressure must be normal.
One person (approx. 55 kg) must sit in the driver's seat.
There should be no heavy luggage in the rear of the vehicle.
1. Turn on the fog lights.
2. Make sure that the center of the bright spot is no more than 40 m away.
3. If the distance is different from the specified one, adjust the headlight aim using the adjuster.
Article source on the website: Hondabook.ru