2. Loosen the special tool bolts.
3. Set the outside diameter of the special tool to match the inside diameter of the bushing and tighten the special tool bolts securely.
4. Install the special tool on the bushing and press out the bushing with a press.
Attention.
- Set the fist securely with a machined surface on the press.
- Do not damage the inner surface of the bushing with the special tool.
5. Place the fist on the press with the machined surface up.
6. Loosen the special tool bolts.
7. Adjust the diameter of the special tool to the outer diameter of the outer sleeve and tighten the special tool bolts.
8. Install the special tool on the new bushing and press it in with a press.
The special tool presses on the outer sleeve.
Pressing in is done so that the end face of the outer sleeve is aligned with the machined surface.