Attention.
- Do not stain the finish during work.
- Work with gloves.
- While working with a screwdriver, protect the components with protective tape or a cloth. Also, wrap the screwdriver with tape so as not to damage the components.
Assembly is carried out in the reverse order of disassembly.
Make sure the nylon bushings and various washers are properly installed.
Check if the seams of the trim have come apart and if there are any wrinkles. Install latches and clips correctly. Check the center and bottom cover clips for damage and replace if necessary.
Correctly install clips of e/conducting and sockets.
Apply lubricant to all rubbing areas of the regulator and check its operation.
Seats with manual adjustment
The illustration shows the seat of a model car with a navigation system and side airbags.
Seat with two-level cushion height adjustment, with manual horizontal adjustment and manual backrest adjustment
The illustration shows a seat with a side airbag.
Seat with two-level cushion height adjustment, with power horizontal adjustment and power backrest adjustment
The illustration shows a seat with a side airbag.