Contents: Checking and replacing fuses ⇊ Removal fuses ⇊ If the fuse is blown ⇊ If the fuse is not blown ⇊
If the battery is charged, then it can be assumed that the fuses have burned out or the bulbs have burned out.
1. Turn the ignition key to position "0".
2. Check the integrity of the fuses.
3. Replace the fuse and light bulb if necessary.
Checking and replacing fuses
The fuse box is located in the driver's footwell and in the engine compartment.
Driver's legroom
Engine compartment
Removal fuses
Fuses are removed using a puller.
If the fuse is blown
The blown fuse is replaced in accordance with the rating indicated on the box.
Never install fuses of the wrong rating. This may cause the electrical wiring cable to burn out.
Note: If the fuse burns out again after replacement, you must contact a service station for diagnostics.
If the fuse is not blown
If the lamp does not light, it is most likely burnt out. It is necessary to check the lamps and replace the burnt out one.
Note: If the bulbs are in good condition, there is a problem with the electrical wiring, so you need to have it diagnosed at a Honda center.
[Publication reprinted from the website «www.HondaBook.ru»]