Contents: Turning lighting fixtures on and off ⇊ Sound signal to remind you that the…⇊ Switching between high and low beam…⇊ Flashing headlights (when overtaking) ⇊ Turn signal switch ⇊ Fog light switch ⇊
Turning lighting fixtures on and off
The switch operates regardless of the ignition key position as follows.
Note: Do not turn on the lights for a long time with the engine off, as this can quickly drain the battery.
Sound signal to remind you that the headlights are not switched off
The signal sounds 1 if the key is in position "I" or "O" and you open the driver's door with the headlights on.
Switching between high and low beam headlights
If you push the lever forward with the low beam on, the high beam will come on.
When the high beam is on, the corresponding indicator on the instrument panel lights up.
For the high beam indicator, see above.
Flashing headlights (when overtaking)
If you pull the lever towards you, the high beam will come on.
Turn signal switch
The turn signal comes on when the ignition key is in position "II".
If the lever is raised up or lowered down to position 1, the corresponding lights will flash.
If you turn the steering wheel slightly, the switch may not return to its original position after completing the turn. In such cases, manually return the switch to its original position.
When changing lanes, raise or lower the lever to position 2.
Fog light switch
The fog lights can be turned on when other exterior lights are on.
To turn on the fog lights, turn the switch to the ON position.
(Material obtained from the website www.hondabook.ru)