Note:
- Avoid scratching the body and adjacent components.
- When pressing components with a flat-head screwdriver, wrap it with protective tape to avoid damage.
1. Remove the plugs from the roof spoiler, then remove the bolts (using a Tone T-30 head).
2. Pull the spoiler off the roof. The sliding clips will remain on the roof side trim bracket.
1. plug; 2. clamp; 3. clamps; 4. sliding clamp, 4; 5. forward; 6. roof side trim bracket; 7. roof spoiler; 8. sliding clamps; 9. roof side trim
3. Remove the sliding clips from the roof side trim bracket, then insert the sliding clips into the roof spoiler. Replace any damaged clips.
4. Remove the plugs from the side roof trim, then unscrew the nuts.
5. Lift the side roof trim, pull it up and remove it.
1. roof side clamp; 2. pin; 3. plug; 4. hook; 5. clamp; 6. side roof clamp; 7. brackets
6. Installation is carried out in the reverse order of removal, taking into account the following:
- Replace the damaged clamp.
- Place the spoiler on the roof, insert all the side clips into the holes in the side roof trim, then slide the spoiler until the clips snap into place.
(Original article on the website: hondabook.ru)