1. forward; 2. threshold panel; 3. expansion clamp; 4. inner wing
1. Remove the door sill panel.
- 1. Pull back the inner wing as far as necessary and remove the expansion clips.
- 2. Slide the sill panel forward and remove it. The side clips will remain in the body.
- 3. Remove the side clamps from the body.
2. Replace damaged clamps.
3. Insert the side clips into the threshold panel.
4. While holding the panel upward, insert all the side clips into the holes in the body, then press the panel down until the clips snap into place.
5. Install the expansion clamps.
6. Install the inner wing.
[Original material on the website «hondabook.ru»]