2. Loosen the screws (A and B), detach the stoppers (C) and brackets (D) from the sunroof subframe (E).
3. Loosen the screws (F and G) securing the sunroof drive cable, brackets (H) and disconnect the sunroof drive cable (I) from the subframe.
4. Disconnect the connector (J) from the sunroof subframe.
5. Pull the sunroof subframe as shown in the figure and detach the sunroof curtain from the guides.
6. Slide the sunroof drive cable (A) and sunroof glass guides (B) rearward and then disconnect them from the sunroof subframe (C).
7. Disconnect the hatch locking mechanism (B) from the guide (A).
8. Installation is carried out in the reverse order of removal. Before installation, apply grease to the sunroof glass guide (A) and subframe (B), as shown in the figure.
