2. Remove glass of the hatch.
3. Disconnect connectors (A, B, C and D), front (E) and rear (F) drain hoses and relay (G) (see picture "Removing the sunroof subframe").
Note: when removing and installing the sunroof subframe and drain hoses, you can injure your hands, work with gloves.
4. Disconnect the clamp (H) and remove the wiring harness (I) from the stretcher (J) hatch.
5. Supporting the sunroof subframe, remove the bolts (TO), starting at the end and disconnect the clips (L), slide the subframe forward and then remove it.
6. Carefully pull out the sunroof subframe through the open front door.
7. To remove the front drain hose flap, remove the front side trim. Tie the top end with a rope (A) front drain hose, then pull it out from the bottom end (IN) and pull out through the front pillar.
8. Remove the rear pillar trim and luggage compartment side trim (see section "Removal and installation of interior trim").
9. Tie the end with a rope (IN) rear drain hose, disconnect the clamps (A) and then pull the rear drain hose at the bottom end (WITH) and pull out through the rear rack.
10. Installation is made in an order, the return to removal. Install clamps (A) onto the rear drain hose as shown.
11. Check up tightness of the hatch.