2. Remove the muffler.
3. Mark the coupling flange and propeller shaft and disconnect them.
4. Remove the 7 rear differential bracket A/rubber isolator A mounting bolts.
5. Support the rear differential assembly with a jack and remove the left and right rubber differential mounts and rear differential bracket B.
6. Carefully, without damaging the differential seal, use a screwdriver to unlock the ring clamps of the left and right drive shafts.
7. Lower the rear differential slightly and disconnect the breather tube from the body.
8. Pull out the left and right drive shafts and lower the rear differential.
9. Install in the reverse order of removal.
- Attach the breather tube securely.
- Be careful not to damage the differential seals when installing the drive shafts.
- Connect to the cardan shaft using the marks made during removal.
- Fill with the required amount of oil.