Driver's front airbag — removal and installation (Honda Avancier 1)

Caution: Before starting work, disconnect the cables from the battery and wait at least 3 minutes.

Removal

1. Remove the panel, then remove the D1 connector from the holder. Disconnect the D_1iand D_1o.



2. Remove the covers on the left and right and unscrew the TORX T-30 bolts using a socket. Remove the airbag.

Installation

1. Installation is carried out in the reverse order of removal.

Caution: Replace TORX bolts with new ones and apply a locking agent to their threads before installation.

After installation, connect the cables to the battery and perform the following check:

• Turn the ignition switch to the ON (II) position and check that the SRS indicator light comes on and goes out after 6 seconds.
• Check the operation of the horn switch.

(The text was taken from the website hondabook.ru)