Caution: This procedure requires travel. Perform the break-in in a safe area.
1. Before performing the break-in procedure, make sure that the parking brake pedal is adjusted correctly (see above).
2. Park the car on a level surface.
3. Release the parking brake.
4. On a safe section, drive at a speed of 50 km/h.
5. Maintaining the specified speed, press the parking brake pedal until it clicks once and drive 400 m.
Maintain the specified speed during the running-in process.
6. After driving the specified distance, stop the car and wait 5-10 minutes for the brake drums to cool down.
- Cool the brake drums before the first ride.
- While the brake drums are cooling, release the parking brake.
7. Repeat the trip according to point 5.
8. After completing the running-in procedure, check the travel of the parking brake pedal (see above).