Types of adhesives
Attention.
- Use the recommended primer, do not mix different primers.
- The primer plays an important role and contributes to the effectiveness of the adhesive. There are two types of primers: for the body and for glass.
- Open primer and adhesive only immediately before use.
- Store primer and adhesive in a cool place.
Glue time
Perform bonding of components for no more than 5 minutes. after applying glue
Minimum holding time after gluing
- In winter, at an ambient temperature of approx. 10°C: 6-8 hours
- In spring and autumn, at an ambient temperature of approx. 20°C: 3-4 hours
- In summer, at an ambient temperature of approx. 30°C: 1-2 hours
Attention. Be sure to be patient. If the holding time is less than specified, the bonding quality may become unsatisfactory.
Examination
1-2 hours after glass installation, check for water leakage. If a leak is found, fix it after the water has dried with the recommended sealant.
If moving the vehicle is required, do so carefully.
When checking for water leakage, pour water onto the glass by pinching the end of the hose.