Note:
- Installation is carried out in the reverse order of removal.
- Be careful not to damage the wiring harness during assembly.
1. Disconnect the negative battery terminal and wait 3 minutes.
2. Remove the front passenger seat.
3. Remove the upholstery from the seat.
4. Loosen the bolts and separate the seat mounting rails together with the weight sensors.
Front passenger seat.
1 - bolts,
2 - sensor connectors,
3 - seat mounting rail,
4 - weight sensor.
- Tightening torque - 14 Nm
5. Disconnect the weight sensor connectors from the passenger presence control unit and remove the weight sensors.