2. Each fault code consists of two numbers, the first number is displayed at 1.2 second intervals and the indicator is lit for 1.2 seconds, and the second is displayed at 0.3 second intervals and the indicator is lit for 0.3 seconds.
3. Fault codes are displayed starting with the largest.
4. If the first number of the code is two-digit, then when it is displayed, the indicator will blink ten times with an interval of 0.1 second, which will mean the unit of the most significant digit of the two-digit number, then after 1.2 seconds the indicator will blink the required number of times, with an interval of 1.2 seconds, equal to the number of the least significant digit of a two-digit number.
Table. SRS System Fault Codes (left hand drive models).
Note: "X" indicates a number at the end of the fault code (0-9) or a letter of the Latin alphabet (A-F), which vary depending on the location of the components on the vehicle.
Table. Passenger Presence Control Unit System Fault Codes (ODS), left hand drive models only.
Table. SRS System Fault Codes (right hand drive models).