2. Connect the special jumper 07PAZ-001010A to the yellow wire of the relay and fuse box.
Left-hand drive models.
Right hand drive models.
3. Turn the ignition switch to the "ON" position.
4. The SRS indicator will come on for six seconds and go out, disconnect the jumper wire 07PAZ-001010A four seconds after the SRS indicator goes out.
5. After disconnecting, the SRS indicator will light up again, connect the jumper wire four seconds after it lights up.
6. After four seconds after the indicator goes out, disconnect the jumper.
7. The indicator will blink twice, which means that the fault codes have been cleared.
8. Turn the ignition key to the "OFF" position and wait 10 seconds.
9. Turn the ignition switch to the "ON" position. If the SRS indicator comes on for six seconds and goes out, the SRS system is completely normal. If there are malfunctions in the SRS system, the indicator will start to display trouble codes after it goes out.
[The text can be found on the website: hondabook.ru]