Note:
- Installation is made in an order, the return to removal.
- Fall off so as not to damage the wiring harness when assembling.
1. Disconnect the negative battery terminal and wait 3 minutes.
2. Remove the glove box.
3. Disconnect the passenger airbag connector.
4. Unscrew the three nuts, cover the airbag module with a cloth, bend the seven clips with a screwdriver, remove the passenger airbag.
- Tightening torque - 9.8 Nm
Passenger Airbag.
1 - nuts,
2 - airbag module,
3 - clamps.