Remove the rubber cover of the engine speed connector located 1 on the right side of the engine and connect a tachometer.
In case of using a Honda PGM tester, or an external diagnostic tool:
Connect a Honda PGM tester or other diagnostic tool to the 16-pin diagnostic socket located on the left side of the center console.
2. Cold (coolant temperature below 20°C) measure the speed x.x. after 10 sec. after starting the engine.
- Turnover x.x. cold: 1300±200/min (position N or P)
If the speed x.x. out of specification, replace the RACV and check again.