1. Drain the coolant (see below).
2. Disconnect the upper and lower hoses and the automatic transmission radiator hoses.
When connecting the automatic transmission radiator hoses, see. ch. Automatic transmission.
3. Disconnect the radiator electric motor connector.
4. Remove the upper radiator brackets and pull the radiator assembly upward.
5. Remove the radiator fan/fan shroud assembly and other components.
6. Installation is carried out in the reverse order of removal.
- Be sure to replace the seals with new ones.
- Check the hoses for defects.
- Install the lower radiator mounts and upper brackets/mounts correctly.