Caution: Do not scratch the hood and body.
1. Remove the windshield wiper arms.
2. Remove the scoop-type air intake.
3. Disconnect the 5-pin connector from the electric motor.
4. Remove the 3 mounting bolts and remove the windshield wiper link from the guide pin.
5. Apply alignment marks to the electric motor and rod, unscrew the nut and remove the rod from the electric motor.
6. Unscrew the 3 mounting bolts and remove the electric motor.
7. Install in the reverse order of removal. Apply alignment marks to the bracket and lever, unscrew the nut and remove the lever from the electric motor.
- Apply grease to the rubbing areas of each lever.
- Connect the connector securely.
- Check the installation position of the levers (see below).
- After installation, check the operation of the windshield wiper.