Caution: Do not scratch the rear door.
1. Remove the rear window wiper arm.
2. Remove the pivot axle cover and unscrew the special nut.
3. Open the rear door and remove the rear door lower trim (see chapter Body).
4. Disconnect the 4-pin connector from the electric motor.
5. Unscrew the 3 mounting bolts and remove the rear window wiper motor.
6. Install in the reverse order of removal.
Apply grease to the friction areas of each lever and hinges.
Connect the connector securely.
Check the lever installation position (see below).
After installation, check the operation of the rear window wiper.