2. Remove 3 screws from the display unit.
3. Disconnect the 20-pin connector and remove the display assembly.
(The article was copied from the website «www.hondabook.ru»)
Complex Information Display — Removing the Display Unit (Honda Avancier 1)
1. Remove the instrument cluster panel (see above).
2. Remove 3 screws from the display unit.
3. Disconnect the 20-pin connector and remove the display assembly.
(The article was copied from the website «www.hondabook.ru»)
2. Remove 3 screws from the display unit.
3. Disconnect the 20-pin connector and remove the display assembly.
(The article was copied from the website «www.hondabook.ru»)
This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
This information has been verified: Emil Safonov
Link in different formats to this article
Comments and feedback from visitors
No comments yet
- General information
- Controls and instruments
- User manual
- Power unit
- Engine maintenance
- Engine repair
- Cooling system
- Engine management
- Power and exhaust system
- Transmission
- Automatic gearbox
- Drive shafts and differential
- Chassis and running gear
- Steering
- Car suspension
- Brake system
- Body and interior
- Doors, locks and windows
- Interior (internal elements)
- Exterior (external elements)
- Air conditioner
- Electrical equipment
- Power devices
- Equipment and devices
- Headlights and lighting
- Electrical circuits