Check the window opening gutter and seal for damage. If there is significant damage, replace.
1. Remove the following components.
Door trim (see above).
Plastic film (required part) (see above).
2. Using the window lifter, position the glass so that the glass mounting bolts become visible.
3. Loosen the glass mounting bolts.
4. Front door: Slide the glass to the rear side.
Rear side door: Slide the glass towards the front.
5. Tighten the glass mounting bolts.
6. Make sure the glass rises and falls smoothly.
7. Raise the glass fully and make sure there is no gap between the glass and the window frame gutter.
Check that the window opening gutter is not twisted.
8. Raise the glass completely, close the door and check the glass for water leaks.
Prepare a hose with an internal hole of 12 mm and adjust the water pressure as follows.
Do not pinch the end of the hose.
9. Install the removed components.