Work with gloves.
While working with a screwdriver, protect the components with protective tape or a cloth. Also, wrap the screwdriver with tape so as not to damage the components.
Backdoor
Install the components in the reverse order of removal.
Check the latches for damage and replace if necessary.
Fasten the components with the clamps so that there are no gaps.
Do not pinch the cable and e / wiring.
When installing clips B, first pull out the inner part, then insert into the slot and press the inner part.
On the door sections
Install the components in the reverse order of removal.
Check the latches for damage and, if necessary, replace them with new ones.
Secure components with latches and clips so that there are no gaps.
Before tightening the upper anchor bolts of the seat belts, make sure that the belts are not twisted.
In the luggage compartment
Install the components in the reverse order of removal.
Check the latches for damage and replace them if necessary.
Connect connectors securely.
Secure components with latches and clips so that there are no gaps.