Caution: Do not damage the body or removable components.
1. Remove the screws from the bottom of the side seal trim and remove the rear cover of the side seal trim.
2. Loosen the screws on the front side of the side seal trim and remove the clamp A from the bottom side.
3. Slide the trim forward, remove the B clips from the trim and remove the trim.
4. Remove the B clamps from the body and install them onto the trim.
Check the latches for damage and replace them if necessary.
5. Align the B latches with the holes on the body and install the trim.
6. Place latch A on the trim and tighten the screw.
Check the latch for damage and replace it if necessary.
7. Install the rear cover of the side seal and secure with screws.
2WD models
Caution: Do not damage the body or removable components.
Install in the reverse order of removal.
Check the latches for damage and replace them if necessary.
Article source on the website HONDABOOK.ru