Front grille (see below).
Front fender trims (see below).
2. Loosen the bolts and then tighten them so that the various components do not move spontaneously.
3. Adjust the position of the hood and the operation of the lock.
4. Tighten all bolts.
5. Make sure the hood closes securely and opens smoothly.
6. To prevent corrosion, apply paint to the hinge mounting bolts.
7. Apply grease to the hinge and lock areas shown in the figure.
8. Install the removed components.
You will find the original on the portal: www.hondabook.ru