2. Slightly loosen the hood hinge bolts.
3. Adjust the hood fit in the following sequence:
- Adjust the fit of the hood on the right and left, as well as front and rear, using the elongated holes on the hood hinges.
- To keep the hood flush with the body at the front and sides, rotate the bolsters on the edges of the hood.
- Adjust the height of the front edge under the hood latch and move it to the right or left until the latch loop is centered on the hood latch.
4. Tighten the bolts securely.
5. Make sure the hood opens normally and locks securely.
6. Apply grease to the hood latch and hood hinges at the points indicated by the arrows.
[Full version on the source website www.hondabook.ru]