Window lifters — general information (Honda Fit 1)

On models with electric door window lifts, the position of the windows and doors is adjusted by pressing the corresponding switch. In this case, the key in the ignition switch must be set to position "II".

From the driver's door panel, you can control the position of the windows of all doors, as well as lock them using the corresponding switch.



On the panel of each passenger door there is a switch, by pressing and holding which the passenger can adjust the position of the glass only on his side.

When you lightly press the driver's window switch down, the window will lower as long as you hold the switch. To raise the window, you must lightly pull the switch up and hold it in this position until the window is completely removed.

The driver's door window switch has an additional function - full lowering and full closing of the driver's window ("AUTO"), which does not require holding the switch in the corresponding position.





To lower the glass, press the switch to the end of its stroke. If you need to stop the glass in a slightly open position, briefly press the switch up and lower it again. To raise the glass, pull the switch up to the end of its stroke.



There is a window lock switch "WINDOW LOCK" on the window lift control panel. When it is pressed, the windows cannot be lowered.

The original text of the article is located on the website www.hondabook.ru