2. Disconnect the 12-pin connector from the switch.
3. Apply battery voltage to the contacts as shown in the figure and make sure that the electric motor rotates smoothly, without any extraneous sounds.
Caution: When the backrest or cushion reaches the extreme position, disconnect the battery immediately.
Electric motor of the sliding mechanism
Electric motor for tilt mechanism
4. If the electric motor does not operate normally, check the continuity of the seat electric wiring.
If the electrical wiring is OK, replace the electric motor (see chapter Body).
Slide switch
Tilt switch
[The article was copied from the website «www.hondabook.ru»]