Note:
- Reassemble in the reverse order of disassembly.
- Before carrying out work, read the chapter "Passive safety system (SRS)".
- After assembly, check the airbags.
- After assembly, make sure that the position of the steering wheel matches the direction of travel.
Disconnect the wire from the negative battery terminal.
1. Lower the steering column down.
2. Remove finishing of the panel of a combination of devices.
A) Gently pull the trim (A) behind the bottom, disconnect the pins (IN) from holders (D) instrument cluster panels (WITH).
b) Gently pull the trim at the top, release the clips (E) and clamps (F and G) and remove the instrument cluster panel trim.
3. Remove finishing No. 2 of the panel of a combination of devices.
A) Loosen the screws (IN).
b) Gently pull the trim (A) towards you, unfasten the fasteners (WITH) and remove trim No. 2 of the instrument cluster panel.
4. Loosen the screw (A) and remove the cap (IN) instrument cluster panels.