2. Using a flashlight, shine it on one side of the catalytic converter and visually check that the light reaches the other side.
3. Install in the order shown in the figure in chapter Mechanical part of the engine.
Checking a three-way catalytic converter (Honda Avancier 1)
1. Remove the catalyst (see chapter Mechanical part of the engine).
2. Using a flashlight, shine it on one side of the catalytic converter and visually check that the light reaches the other side.
3. Install in the order shown in the figure in chapter Mechanical part of the engine.
2. Using a flashlight, shine it on one side of the catalytic converter and visually check that the light reaches the other side.
3. Install in the order shown in the figure in chapter Mechanical part of the engine.
This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
This information has been verified: Emil Safonov
Link in different formats to this article
Comments and feedback from visitors
No comments yet
- General information
- Controls and instruments
- User manual
- Power unit
- Engine maintenance
- Engine repair
- Cooling system
- Engine management
- Power and exhaust system
- Transmission
- Automatic gearbox
- Drive shafts and differential
- Chassis and running gear
- Steering
- Car suspension
- Brake system
- Body and interior
- Doors, locks and windows
- Interior (internal elements)
- Exterior (external elements)
- Air conditioner
- Electrical equipment
- Power devices
- Equipment and devices
- Headlights and lighting
- Electrical circuits