Attention.
- Avoid damaging the door panel and components being removed during work.
- Do not kink the cable.
- When using a screwdriver, cover the components with protective tape or cloth. Also, wrap the screwdriver with tape so as not to damage the components.
Remove components in the numbered order shown in the illustration.
Install in the reverse order of removal.
Check the clamps for damage and replace them if necessary.
Connect the connectors and the inner handle cable correctly.
Carefully pass the locking lever through the hole in the trim.
Install the trim so that it fits snugly against the panel.
(Full version on the source website: «HondaBook.ru»)