Attention. If the engine is hot, let it cool down before starting work.
1. Discharge the refrigerant.
2. Remove the front grill, see ch. Body.
3. Turn off bolts and remove the right and left top arms of a radiator.
4. Turn off bolts, then disconnect a final hose and a tube of the condenser.
Attention. After disconnection plug the holes with plugs.
5. Remove the bolts, push down on the engine side radiator, remove the upper brackets and condenser mountings, then remove the condenser.
Attention. Be careful not to damage the radiator core and condenser.
6. Installation is carried out in the reverse order of removal, taking into account the following.
- Replace the O-rings of the tubes with new ones and lubricate them with compressor oil before installation (ND-OIL8).
- Be careful not to damage the radiator core and condenser.
- After installation, check the operation of the air conditioner.